Jumbo Villa

Symmetry Hardware

These table legs are handmade to order - current lead times vary

Bolt together assembly
Bar table height
Under mount holes hide screws
Adjustable feet included
Sturdy base for granite table tops
Quantity 1 makes 1 table

Dimensions
- Height: 31"-42"
- Width (at top): 18"-30"
- Length: 36"-96"
- Steel: 2"x2" tube steel

Hardware
- Hex screws for mounting
- Screw diameter: 1/4"
- Screw length: 1.25"
- Bolts: 6
- Lock washers: 6
- Adjustable feet: 4

Finishes
- Clear sealant
- Industrial dark
- Satin Black powder coat
- Silver Metallic powder coat
- Gloss White powder coat
- Brushed
- Blackened
- Antiqued Copper Patina

This table base includes everything shown and requires assembly

Width (at top) =

Quantity

$ 530.00

Finishes Explained

We don't shave our legs, but we do make them look pretty

Clear sealant

More Photos

This is the finish you see in the photos above. The smooth surface is cleaned and then sealed with a special rust preventing coat. It's identical to how the steel looks straight from the mill, but with added protection. This industrial material will have inconsistencies and blemishes on its surface.

Industrial dark

More Photos

We finish this the same as our clear sealant, except the natural color of this steel is different. It is a dark charcoal color, that can vary from piece to piece. It is not a bright and shiny metal. Even with the rust preventing clear coat, the surface retains more of a matte sheen. The heat mark stripe on this steel runs down the center on one side. This industrial material will have inconsistencies and blemishes on its surface.

Satin Black powder coat

More Photos

Powder coating is an environmentally friendly alternative to paint. Our black is fine textured, and has a soft granular feel. The sheen on the Satin Black is minimal.

Gloss White powder coat

More Photos

Gloss White is a modern look. It's a striking pure white, that accentuates the simple lines of the design. The high gloss sheen is shiny and smooth. People often pair this with a table top that is lighter stained or sunbleached.

Brushed

More Photos

For brushed, we use a burnisher to get a linear scratch pattern on the surface. Similar to how stainless steel is commonly finished, it resembles a #4 Satin Nickel finish. We then seal it with a rust preventing clear coat.

Silver Metallic powder coat

More Photos

This is a special two step process. A base of Metallic Silver with a high gloss 2nd coat is applied. The base coat has tiny specs in it to give dimension. The clear coat adds depth and is smooth to the touch.

Blackened oxide

More Photos

Under the shadow of a table top, this finish looks very similar to our Industrial Dark. We start with the lighter colored steel. Then it gets chemically oxidized, causing it to blacken. It is not a perfect black. There is a slight blue and you can still see brownish/red streaks where the chemical inconsistently oxidized the metal. The sheen is a mid/high gloss.

Antiqued Copper Patina

More Photos

We achieve this finish with a special metal oxide solution. Then, we use a clear sealant to preserve the color and the steel. The result is a finish that resembles an aged metal with a character-rich, copper rust hue.

Jumbo Villa

Symmetry Hardware

These table legs are handmade to order - current lead times vary

Dimensions

Hardware

Finishes

This table base includes everything shown and requires assembly